View source for 10G-EPON

{{Short description|Computer networking standard}}
{{Use dmy dates|date=August 2024}}
The '''10&nbsp;Gbit/s Ethernet Passive Optical Network''' standard, better known as '''10G-EPON''' allows [[computer network]] connections over telecommunication provider infrastructure. The standard supports two configurations: ''symmetric'', operating at 10&nbsp;Gbit/s data rate in both directions, and ''asymmetric'', operating at 10&nbsp;Gbit/s in the [[downstream (networking)|downstream]] (provider to customer) direction and 1&nbsp;Gbit/s in the [[upstream (networking)|upstream]] direction. It was ratified as IEEE 802.3av standard in 2009. EPON is a type of [[passive optical network]], which is a point-to-multipoint network using passive [[fiber-optic splitter]]s rather than powered devices for fan-out from hub to customers.
== Standardization==
The [[Ethernet in the first mile]] task force of the [[Institute of Electrical and Electronics Engineers]] (IEEE) [[IEEE 802.3|802.3 standards committee]] published standards that included a [[passive optical network]] (PON) variant in 2004.<ref>{{cite web
|title=IEEE P802.3ah Ethernet in the First Mile Task Force
|work=official web site
|publisher=IEEE 802 LAN/MAN standards committee
|url=http://www.ieee802.org/3/efm
|access-date=28 August 2011
|archive-url=https://web.archive.org/web/20110717202725/http://www.ieee802.org/3/efm
|archive-date=17 July 2011
|url-status=live
|df=dmy
}}
</ref>
In March 2006, the IEEE 802.3 held a call for interest for a 10&nbsp;Gbit/s Ethernet PON study group. According to the CFI materials, representatives from the following companies supported the formation of the study group:<ref>[http://www.ieee802.org/3/cfi/0306_1/cfi_0306_1.pdf 10Gb/s PHY for EPON – Call For Interest Presentation]</ref>
[[Advance/Newhouse Communications]], [[Aeluros]], [[Agilent]], [[Allied Telesyn]], [[Alloptic]], [[Ample Communications]], [[Astar-ODSM]], [[Broadcom]], [[Centillium Communications]], [[China Netcom]], [[China Telecom]], [[Chunghwa Telecom]], [[Cisco Systems]], [[ClariPhy Communications]], [[Conexant Systems]], [[Corecess]], [[Corning Incorporated|Corning]], [[Delta Electronics]], [[Electronics and Telecommunications Research Institute|ETRI]], [[Fiberxon]], [[FOTEK Optoelectronics]], [[ImmenStar]], [[Infinera]], [[ITRI]], [[KDDI]] R&D Labs., [[K-Opticom Corporation|K-Opticom]], [[Korea Telecom]], [[NEC]], [[Opnext|OpNext]], [[Picolight]], [[Quake Technologies]], [[Salira Systems]], [[Samsung Electronics]], [[Softbank]] BB, [[Teknovus]], [[Teranetics]], [[Texas Instruments]], [[Telecom Malaysia]], [[TranSwitch]], [[UNH-IOL]], [[UTStarcom]], [[Vitesse Semiconductor|Vitesse]].
By September 2006, IEEE 802.3 formed the 802.3av ''10G-EPON'' Task Force<ref>{{cite web|title=10Gb/s Ethernet Passive Optical Network: IEEE P802.3av Task Force |work=official web site |date=14 October 2009 |url=http://www.ieee802.org/3/av/ |access-date=7 May 2011 |archive-url=https://web.archive.org/web/20110606081958/http://www.ieee802.org/3/av/ |archive-date=6 June 2011 |url-status=live |df=dmy }}</ref> to produce a draft standard. In September 2009, the IEEE 802 Plenary ratified an amendment to 802.3 to publish 802.3av amendment as the standard IEEE Std 802.3av-2009.<ref>{{cite book|title=IEEE Std 802.3av-2009, IEEE Standard for Ethernet – Amendment 1: Physical Layer Specifications and Management Parameters for 10&nbsp;Gb/s Passive Optical Networks|year=2009|publisher=IEEE|url=http://standards.ieee.org/findstds/standard/802.3av-2009.html|archive-url=https://archive.today/20131217173040/http://standards.ieee.org/findstds/standard/802.3av-2009.html|url-status=dead|archive-date=17 December 2013}}</ref>
Major milestones:
{| class="wikitable" border="1"
|-
! Date
! Milestone
|-
| September 2006
| IEEE 802.3av task force was formed and met in [[Knoxville, Tennessee]].
|-
| December 2007
| Draft D1.0 produced.
|-
| July 2008
| Draft D2.0 produced. Working Group balloting began.
|-
| November 2008
| Cut-off date for last technical change
|-
| January 2009
| Draft D3.0 produced. Sponsor balloting began.
|-
| September 2009
| Standard approved.
|}
The work on the 10G-EPON was continued by the IEEE P802.3bk ''Extended EPON'' Task Force,<ref>{{cite web |title= IEEE P802.3bk Extended EPON Task Force |url= http://www.ieee802.org/3/bk/index.html}}</ref> formed in March 2012. The major goals for this Task Force included adding support for PX30, PX40, PRX40, and PR40 power budget classes to both 1G-EPON and 10G-EPON. The 802.3bk amendment was approved by the IEEE-SA SB in August 2013 and published soon thereafter as the standard IEEE Std 802.3bk-2013.<ref>{{cite book|title=IEEE Std 802.3bk-2013, IEEE Standard for Ethernet – Amendment 1: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks|year=2013|publisher=IEEE|url=http://standards.ieee.org/findstds/standard/802.3bk-2013.html|archive-url=https://web.archive.org/web/20131217221237/http://standards.ieee.org/findstds/standard/802.3bk-2013.html|url-status=dead|archive-date=17 December 2013}}</ref> On 4 June 2020, the IEEE approved IEEE 802.3ca, which allows for symmetric or asymmetric operation with downstream speeds of 25&nbsp;Gbit/s or 50&nbsp;Gbit/s, and upstream speeds of 10&nbsp;Gbit/s, 25&nbsp;Gbit/s, or 50&nbsp;Gbit/s over the same power-distance-splitter budgets.<ref>{{cite web | title = IEEE 802.3ca-2020 - IEEE Standard for Ethernet Amendment 9 | url = https://standards.ieee.org/ieee/802.3ca/7440/ | publisher = IEEE | date = 2020-07-03 }}</ref><ref>{{cite web | url = https://www.cablelabs.com/25g-50g-epon-standard-crosses-the-finish-line-enhancing-fiber-deployments-as-part-of-cables-10g-platform | title = 25G/50G-EPON Standard Crosses the Finish Line – Enhancing Fiber Deployments as Part of Cable's 10G Platform | first = Curtis | last = Knittle | publisher = CableLabs | date = 2020-07-23 }}</ref>
== Architecture ==
=== Symmetric (10/10G-EPON) ===
Symmetric-rate 10/10G-EPON supports both transmit and receive data paths operating at 10&nbsp;Gbit/s. The main driver for 10/10G-EPON was to provide adequate downstream and upstream bandwidth to support [[multi-family residential]] building (known in the standard as Multi Dwelling Unit or MDU) customers. When deployed in the MDU configuration, one EPON Optical Network Unit (ONU) may be connected to up to a thousand subscribers.
The 10/10G-EPON employs a number of functions that are common to other point-to-point Ethernet standards. For example, such functions as [[64b/66b encoding|64B/66B line coding]], self-synchronizing scrambler, or gearbox are also used in optical fiber types of [[10 Gigabit Ethernet]] links.
=== Asymmetric (10/1G-EPON) ===
The asymmetric 10/1G-EPON appear less challenging than the symmetric option, as this specification relies on fairly mature technologies. The upstream transmission is identical to that of the 1G-EPON (as specified in IEEE standard 802.3ah), using deployed burst-mode optical transceivers. The downstream transmission, which uses continuous-mode optics, will rely on the maturity of 10&nbsp;Gbit/s point-to-point Ethernet devices.
=== Efficiency ===
Like all EPON networks, 10G-EPON transmits data in variable-length packets up to 1518 bytes, as specified in the IEEE 802.3 standard. These variable-length packets are better suited to IP traffic than the fixed-length, 53-byte cells used by other Passive Optical Networks, such as [[GPON]]. This can significantly reduce 10G-EPON's overhead in comparison to other systems. Typical 10G-EPON overhead is approximately 7.42%. Typical GPON overhead is 13.22%. This high data-to-overhead ratio also enables high utilization with low-cost optical components.<ref>{{cite web|title=What is EPON?|url=http://newwavedv.com/markets/telecommunications/what-is-epon/|website=New Wave Design & Verification}}</ref>
=== Power budgets ===
The 802.3av defines several power budgets, denoted either PR or PRX. PRX power budget describes asymmetric–rate PHY for PON operating at 10&nbsp;Gbit/s downstream and 1&nbsp;Gbit/s upstream. PR power budget describes symmetric–rate PHY for PON operating at 10&nbsp;Gbit/s downstream and 10&nbsp;Gbit/s upstream. Each power budget is further identified with a numeric representation of its class, where value of 10 represents low power budget, value of 20 represents medium power budget, and value of 30 represents high power budget. The 802.3av draft standard defines the following power budgets:
{| class="wikitable" border="1"
|-
! Power Budget
! Downstream Line Rate <br> (Gbit/s)
! Upstream Line Rate <br> (Gbit/s)
! Channel Insertion Loss <br> (dB)
! Notes
|-
! PRX10
| 10.3125
| 1.25
| 20
| compatible with PX10 power budget defined for 1G-EPON by 802.3ah
|-
! PRX20
| 10.3125
| 1.25
| 24
| compatible with PX20 power budget defined for 1G-EPON by 802.3ah
|-
! PRX30
| 10.3125
| 1.25
| 29
| compatible with PX30 power budget defined for 1G-EPON by 802.3bk
|-
! PR10
| 10.3125
| 10.3125
| 20
| compatible with PX10 power budget defined for 1G-EPON by 802.3ah
|-
! PR20
| 10.3125
| 10.3125
| 24
| compatible with PX20 power budget defined for 1G-EPON by 802.3ah
|-
! PR30
| 10.3125
| 10.3125
| 29
| compatible with PX30 power budget defined for 1G-EPON by 802.3bk
|}
The 802.3bk added support for a new 10/10G-EPON and 10/1G-EPON power class for PR or PRX PMDs, respectively, as shown below:
{| class="wikitable" border="1"
|-
! Power Budget
! Downstream Line Rate <br> (Gbit/s)
! Upstream Line Rate <br> (Gbit/s)
! Channel Insertion Loss <br> (dB)
! Notes
|-
! PRX40
| 10.3125
| 1.25
| 33
| compatible with PX40 power budget defined for 1G-EPON by 802.3bk
|-
! PR40
| 10.3125
| 10.3125
| 33
| compatible with PX40 power budget defined for 1G-EPON by 802.3bk
|}
=== Forward error correction ===
The 10G-EPON employs a ''stream-based'' [[forward error correction]] (FEC) mechanism based on [[Reed–Solomon error correction|Reed-Solomon(255, 223)]]. The FEC is mandatory for all channels operating at 10&nbsp;Gbit/s rate, i.e., both downstream and upstream channels in symmetric 10&nbsp;Gbit/s EPON and the downstream channel in the 10/1&nbsp;Gbit/s asymmetric EPON. Upstream channel in the asymmetric EPON is the same as in 1&nbsp;Gbit/s EPON, an optional frame-based FEC using Reed-Solomon(255, 239).
=== Usable bandwidth ===
10G-EPON uses [[64b/66b encoding|64B/66B line coding]], thus encoding overhead is just 3.125% compared to 25% encoding overhead that 1G-EPON has due to its use of [[8b/10b encoding]].
The usable bandwidth in 10G-EPON is 10&nbsp;Gbit/s out of a raw bandwidth of 10.3125&nbsp;Gbit/s.
== Backward compatibility ==
The 10G-EPON standard defines a new physical layer, keeping the MAC, MAC Control and all the layers above unchanged to the greatest extent possible. This means that users of 10G-EPON can expect backward compatibility of network management system (NMS), PON-layer operations, administrations, and maintenance (OAM) system, DBA and scheduling, and so on.
=== Coexistence with 1G-EPON ===
The 802.3av standard places significant emphasis on enabling simultaneous operation of 1&nbsp;Gbit/s and 10&nbsp;Gbit/s EPON systems on the same outside plant. In the downstream direction, the 1&nbsp;Gbit/s and 10&nbsp;Gbit/s channels are separated in the wavelength domain, with 1&nbsp;Gbit/s transmission limited to 1480–1500&nbsp;nm band and 10&nbsp;Gbit/s transmission using 1575–1580&nbsp;nm band.
In the upstream direction, the 1&nbsp;Gbit/s and 10&nbsp;Gbit/s bands overlap. 1&nbsp;Gbit/s band spreads from 1260 to 1360&nbsp;nm; 10&nbsp;Gbit/s band uses 1260 to 1280&nbsp;nm band. This allows both upstream channels to share spectrum region characterized by low chromatic dispersion, but requires the 1&nbsp;Gbit/s and 10&nbsp;Gbit/s channels to be separated in time domain. Since burst transmissions from different ONUs now may have different line rates, this method is termed ''dual-rate TDMA''.
Various OLT implementations may support 1&nbsp;Gbit/s and 10&nbsp;Gbit/s transmissions only downstream direction, only upstream direction, or in both downstream and upstream directions. The following table illustrates which ONU types are simultaneously supported by various OLT implementations:
{| class="wikitable" border="1"
|-
! OLT Implementation
! Supported ONU types
|-
| Downstream: two wavelengths<BR>Upstream: single rate
| (1) 1G-EPON ONU<BR>(2) 10/1G-EPON ONU
|-
| Downstream: single wavelength<BR>Upstream: dual rate
| (1) 10/10G-EPON ONU<BR>(2) 10/1G-EPON ONU
|-
| Downstream: two wavelengths<BR>Upstream: dual rate
| (1) 1G-EPON ONU<BR>(2) 10/1G-EPON ONU<BR>(3) 10/10G-EPON ONU
|}
== See also ==
*[[10G-PON]]
* [[Ethernet in the first mile]]
== References ==
{{reflist}}
== External links ==
* {{cite web |title= Overview of 10Gb/s EPON Status, Requirements and Applications |publisher= Ethernet Alliance |date= May 2009 |url= http://www.ethernetalliance.org/wp-content/uploads/2011/10/10GEPON_WP_EA_from-FC_Final_updated_V2d4.pdf |access-date= 7 May 2011 }}
{{Ethernet}}
{{DEFAULTSORT:10g-Epon}}
[[Category:Broadband]]
[[Category:Network architecture]]
[[Category:Fiber-optic communications]]
[[Category:IEEE 802]]