View source for Freeform surface modelling

{{Short description|Techniques for creating complex surfaces in 3D graphics software}}
{{Multiple issues|section=|
{{More citations needed|date=April 2017}}
{{Lead rewrite|date=April 2017}}
}}
'''Freeform surface modelling''' is a technique for engineering freeform [[Computer representation of surfaces|surfaces]] with a [[Computer-aided design|CAD]] or [[Computer-aided industrial design|CAID]] system.
The technology has encompassed two main fields. Either creating aesthetic surfaces ([[class A surfaces]]) that also perform a function; for example, car bodies and consumer product outer forms, or technical surfaces for components such as gas turbine blades and other fluid dynamic engineering components.
CAD software packages use two basic methods for the creation of surfaces. The first begins with construction curves ([[Spline (mathematics)|splines]]) from which the 3D surface is then swept (section along guide rail) or meshed (lofted) through.
[[File:Ff surface3 t.png|thumb|A surface being created from curves]]
The second method is direct creation of the surface with manipulation of the surface poles/control points.
[[File:Freeform1.gif|thumb|Surface edit by poles]]
From these initially created surfaces, other surfaces are constructed using either derived methods such as offset or angled extensions from surfaces; or via bridging and blending between groups of surfaces.
[[File:blend1.png|thumb|Variable smooth blend between surfaces<br/>([[:File:blend1a.gif|animated version]])]]
== Surfaces ==
'''Freeform surface''', or '''freeform surfacing''', is used in [[Computer-aided design|CAD]] and other [[computer graphics]] software to describe the skin of a 3D geometric element. Freeform surfaces do not have rigid radial dimensions, unlike regular surfaces such as [[Plane (mathematics)|plane]]s, [[cylinder (geometry)|cylinder]]s and [[conic]] surfaces. They are used to describe forms such as [[turbine]] blades, car bodies and boat [[Hull (watercraft)|hull]]s. Initially developed for the automotive and [[aerospace]] industries, freeform surfacing is now widely used in all [[engineering]] design disciplines from consumer goods products to ships. Most systems today use [[nonuniform rational B-spline]] (NURBS) mathematics<ref name="hp.com">{{cite web|last1=Metzger|first1=Michael|last2=Eismann|first2=Sabine|title=Freeform Surface Modeling|url=http://www.hpl.hp.com/hpjournal/95oct/oct95a6.pdf|website=hp.com|access-date=April 15, 2017}}</ref> to describe the surface forms; however, there are other methods such as [[Gordon surface]]s or [[Coons patch|Coons surface]]s .
The forms of freeform surfaces (and curves) are not stored or defined in [[Computer-aided design|CAD]] software in terms of [[polynomial equation]]s, but by their poles, [[Degree (angle)|degree]], and number of patches (segments with spline curves). The degree of a surface determines its mathematical properties, and can be seen as representing the shape by a polynomial with variables to the power of the degree value. For example, a surface with a degree of 1 would be a flat [[cross section (geometry)|cross section]] surface. A surface with degree 2 would be curved in one direction, while a degree 3 surface could (but does not necessarily) change once from [[wikt:concave|concave]] to [[wikt:convex|convex]] curvature. Some CAD systems use the term ''order'' instead of ''degree''. The order of a polynomial is one greater than the degree, and gives the number of [[coefficient]]s rather than the greatest [[exponent]].
[[File:Surface modelling.svg|thumb|Example surface pole map]]
The poles (sometimes known as ''[[Control point (mathematics)|control point]]s'') of a surface define its shape. The natural surface edges are defined by the positions of the first and last poles. (Note that a surface can have trimmed boundaries.) The intermediate poles act like magnets drawing the surface in their direction. The surface does not, however, go through these points. The second and third poles as well as defining shape, respectively determine the start and [[tangent]] angles and the [[curvature]]. In a single patch surface ([[Bézier surface]]), there is one more pole than the degree values of the surface. Surface patches can be merged into a single NURBS surface; at these points are knot lines. The number of knots will determine the influence of the poles on either side and how smooth the transition is. The smoothness between patches, known as ''continuity'', is often referred to in terms of a ''C value'':
* C0: just touching, could have a nick
* C1: tangent, but could have sudden change in curvature
* C2: the patches are curvature continuous to one another
Two more important aspects are the U and V parameters. These are values on the surface ranging from 0 to 1, used in the mathematical definition of the surface and for defining paths on the surface: for example, a trimmed boundary edge. Note that they are not proportionally spaced along the surface. A curve of constant U or constant V is known as an isoperimetric curve, or U (V) line. In CAD systems, surfaces are often displayed with their poles of constant U or constant V values connected together by lines; these are known as ''control polygons''.
== Modelling ==
When defining a form, an important factor is the continuity between surfaces - how smoothly they connect to one another.
One example of where surfacing excels is automotive body panels. Just blending two curved areas of the panel with different radii of curvature together, maintaining tangential continuity (meaning that the blended surface doesn't change direction suddenly, but smoothly) won't be enough. They need to have a continuous rate of curvature change between the two sections, or else their reflections will appear disconnected.
The continuity is defined using the terms:
* G0 – position (touching)
* G1 – tangent (angle)
* G2 – curvature (radius)
* G3 – acceleration (rate of change of curvature)
[[File:Geometric continuity.png|alt=Geometric continuity|none|thumb|Curve and line G0, G1, G2 and G3 continuity]]
To achieve a high quality [[NURBS]] or Bézier surface, degrees of 5 or greater are generally used.
== Freeform surface modelling software ==
<!-- Please only list software that is notable enough to have a Wikipedia article (read: no red links).-->
{{Div col|colwidth=20em}}
* [[Autodesk Alias]]
* [[Autodesk Inventor]]
* [[Blender (software)|Blender]]
* [[CATIA]] (FreeStyle)
* [[Cobalt (CAD program)|Cobalt]]
* [[form-Z|form•Z]]
* [[Fusion 360]] (Autodesk)
* [[ICEMSurf]]
* [[KeyCreator]]
* [[Onshape]]
* [[Siemens NX]]
* [[PowerSHAPE]]
* [[PTC Creo]], formerly ProEngineer ISDX
* [[PTC Creo Elements/Pro]]
* [[Rhinoceros 3D]]
* [[SolidWorks]]
* [[SolidThinking]]
* [[Tebis]]
{{Div col end}}
== See also ==
{{Div col|colwidth=20em}}
* [[Bézier surface]]
* [[Computer representation of surfaces]]
* [[Freeform surface machining]]
* [[NURBS]]
* [[Parametric surface]]
* [[Solid modelling]]
* [[Steven Anson Coons]]
{{Div col end}}
==References==
{{Reflist}}
[[Category:3D computer graphics]]
[[Category:Computer-aided design]]
[[Category:Surfaces]]