View source for Lathe

{{short description|Machine tool which rotates the work piece on its axis}}
{{distinguish|text=[[lath]], a thin piece of wood}}
{{Other uses}}
{{Multiple issues|
{{More footnotes needed|date=April 2014}}
{{Lead too short|date=August 2021}}
}}
[[File:HwacheonCentreLathe 460x1000.jpg|thumb|upright=1.35|Modern [[metal lathe]]]]
[[File:Watchmaker's Lathe in use.jpg|thumb|upright=1.35|A [[watchmaker]] using a lathe to prepare a component cut from copper for a watch]]
A '''lathe''' ({{IPAc-en|l|eɪ|ð}}) is a [[machine tool]] that rotates a [[workpiece]] about an [[axis of rotation]] to perform various operations such as [[cutting]], [[sanding]], [[knurling]], [[drilling]], [[Deformation (engineering)|deformation]], [[facing (machining)|facing]], [[Threading (manufacturing)|threading]] and [[turning]], with tools that are applied to the workpiece to create an object with [[rotational symmetry|symmetry]] about that axis.<ref>[http://uhv.cheme.cmu.edu/procedures/machining/ch7.pdf Lathes] in Chapter 7 of US Army Training Circulation published in 1996 (Chemical Engineering Department, [[Carnegie Mellon University]] website)</ref>
Lathes are used in [[woodturning]],  [[metalworking]], [[metal spinning]], [[thermal spraying]], reclamation, and glass-working. Lathes can be used to shape [[pottery]], the best-known design being the [[Potter's wheel]]. Most suitably equipped metalworking lathes can also be used to produce most [[Solid of revolution|solids of revolution]], plane surfaces and screw threads or [[helix|helices]]. Ornamental lathes can produce three-dimensional solids of incredible complexity. The workpiece is usually held in place by either one or two ''centers'', at least one of which can typically be moved horizontally to accommodate varying workpiece lengths. Other work-holding methods include clamping the work about the axis of rotation using a chuck or [[collet]], or to a [[Lathe faceplate|faceplate]], using clamps or [[Dog (engineering)|dog clutch]]. Of course, lathes can also complete milling operations by installing special lathe milling fixtures.<ref>{{Cite web |last=TC 9-524 |first=Chapter 7 |title=LATHES |url=http://uhv.cheme.cmu.edu/procedures/machining/ch7.pdf |website=Carnegie Mellon University}}</ref>
Examples of objects that can be produced on a lathe include [[screw]]s, [[candlestick]]s, [[gun barrel]]s, [[cue stick]]s, [[Furniture#Table|table]] legs, [[bowl (vessel)|bowl]]s, [[baseball bat]]s, [[pen]]s, musical instruments (especially [[woodwind|woodwind instruments]]), and [[crankshaft]]s.
== History ==
[[File:Lathe turned pillars at Chennakeshava temple in Belur.jpg|thumb|Lathe turned pillars at [[Chennakeshava Temple, Belur]]]]
The lathe is an ancient tool. The earliest evidence of a lathe dates back to [[Ancient Egypt]] around 1300 BC.<ref>{{Cite book |title= An Illustrated Guide to Furniture History |last= M. Oats | first= Joclyn |publisher= Routledge |year= 2021 |isbn= 9781000406108 |url= https://books.google.com/books?id=0_kvEAAAQBAJ&q=Earliest+woodworking+lathe}}</ref> There is also tenuous evidence for its existence at a Mycenaean Greek site, dating back as far as the 13th or 14th century BC.<ref name="auto">{{cite web |url=http://www.turningtools.co.uk.wgo.ca/history2/history-turning2.html |title=A brief history of woodturning |last=Clifford |first=Brian |website=The Woodturner's Workshop |publisher=Woodturners' Guild of Ontario |access-date=2018-07-24 }}</ref>
Clear evidence of turned artifacts have been found from the 6th century BC: fragments of a wooden bowl in an [[Etruscan civilization|Etruscan]] tomb in Northern Italy as well as two flat wooden dishes with decorative turned rims from [[Asia Minor|modern Turkey]].<ref name="auto"/>
During the [[Warring States period]] in [[China]], {{Circa|400 BC}}, the ancient Chinese used rotary lathes to sharpen tools and weapons on an industrial scale.<ref>{{cite AV media |title=Emperor's Ghost Army |url=http://www.pbs.org/wgbh/nova/ancient/emperors-ghost-army.html |format=Documentary|time=26:00|publisher=PBS|archive-url=https://web.archive.org/web/20160115023141/http://www.pbs.org/wgbh/nova/ancient/emperors-ghost-army.html|archive-date=2016-01-15|url-status=live}}</ref>
The first known painting showing a lathe dates to the 3rd century BC in [[ancient Egypt]].<ref name="auto"/> [[Pliny the Elder|Pliny]] later describes the use of a lathe for turning soft stone in his [[Natural History (Pliny)|Natural History]] (Book XXX, Chapter 44).
[[File:Galica Vara Workshop016.jpg|thumb|upright|left|A craftsman working a chair leg on a lathe]]
Precision metal-cutting lathes were developed during the lead up to the [[Industrial Revolution]] and were critical to the manufacture of mechanical inventions of that period. Some of the earliest examples include a version with a mechanical cutting tool-supporting carriage and a set of gears by Russian engineer [[Andrey Nartov]] in 1718 and another with a slide-rest shown in a 1717 edition of the French ''[[Encyclopédie]]''. The slide-rest was a particularly important development because it constrains the motion of the cutting tool to generate accurate cylindrical or conical surfaces, unlike earlier lathes that involved freehand manipulation of the tool.<ref name="Roe1916">{{citation | last = Roe | first = Joseph Wickham | title = English and American Tool Builders | publisher = Yale University Press | year = 1916 | location = New Haven, Connecticut | url = https://books.google.com/books?id=X-EJAAAAIAAJ | lccn = 16011753}}. Reprinted by McGraw-Hill, New York and London, 1926 ({{LCCN|27024075}}); and by Lindsay Publications, Inc., Bradley, Illinois, ({{ISBN|978-0-917914-73-7}}).</ref>
[[File:Jan Verbruggen Foundry Drawing 47 Horizontal Boring Machine.jpg|thumb|Exact drawing made with [[camera obscura]] of horizontal boring machine by Jan Verbruggen in Woolwich Royal Brass Foundry approx. 1778 (drawing 47 out of set of 50 drawings)]]
By the 1770s, precision lathes became practical and well-known. A slide-rest is clearly shown in a 1772 edition of the Encyclopédie and during that same year a horse-powered cannon boring lathe was installed in the [[Royal Arsenal]] in [[Woolwich]], England by [[Jan Verbruggen]]. Cannon bored by Verbruggen's lathe were stronger and more accurate than their predecessors and saw service in [[American Revolutionary War]]. [[Henry Maudslay]], the inventor of many subsequent improvements to the lathe worked as an apprentice in Verbruggen's workshop in Woolwich.<ref>{{cite web |url=https://ocw.tudelft.nl/wp-content/uploads/ED2011_2_Fabrikagetechnologie.pdf |title=Development of Production Technology and Machine Tools (presentation notes) |last=Tomiyama |first=Tetsuo |date=2016-02-16 |website=OpenCourseWare: TUDelft |publisher=TUDelft |pages=18–21 |archive-url=https://web.archive.org/web/20180725054610/https://ocw.tudelft.nl/wp-content/uploads/ED2011_2_Fabrikagetechnologie.pdf |archive-date=2018-07-25 |url-status=live |access-date=2018-07-24 }} {{Cite AV media |url=https://ocw.tudelft.nl/course-lectures/2-ontwikkeling-fabricagetechnologie/ |title=02. Ontwikkeling Fabricagetechnologie |trans-title=02. Development of Manufacturing Technology |date=2011 |last=Tomiyama |first=Tetsuo |medium= Lecture |location= Delft, Netherlands |language=en |publisher=TUDelft}}</ref>
During the [[Industrial Revolution]], mechanized power generated by water wheels or [[steam engines]] was transmitted to the lathe via line shafting, allowing faster and easier work. Metalworking lathes evolved into heavier machines with thicker, more rigid parts.  Between the late 19th and mid-20th centuries, individual electric motors at each lathe replaced line shafting as the power source. Beginning in the 1950s, [[servomechanism]]s were applied to the control of lathes and other machine tools via numerical control, which often was coupled with computers to yield [[Numerical control|computerized numerical control (CNC)]]. Today manually controlled and [[Numerical control|CNC]] lathes coexist in the manufacturing industries.
== Design ==
=== Components ===
[[File:Lathe.PNG|thumb|left|A metalworking lathe from 1911, showing component parts:{{ordered list|list_style_type=lower-alpha|
| bed
| carriage (with ''cross''-slide and tool post)
| headstock
| back gear (other gear train nearby drives lead screw)
| cone pulley for a [[Line shaft|belt drive]] from an external power source
| faceplate mounted on spindle
| tailstock
| leadscrew}}
]]
A lathe may or may not have legs, which sit on the floor and elevate the lathe bed to a working height. A lathe may be small and sit on a workbench or table, not requiring a stand.
Almost all lathes have a bed, which is almost always a horizontal beam, although [[CNC]] lathes commonly have an inclined or vertical beam for a bed to ensure that [[swarf]], or chips, falls free of the bed. Woodturning lathes specialized for turning large bowls often have no bed or tail stock, merely a free-standing headstock and a cantilevered tool-rest.
At one end of the bed (almost always the left, as the operator faces the lathe) is a headstock. The headstock contains high-precision spinning bearings. Rotating within the bearings is a horizontal axle, with an axis parallel to the bed, called the [[Spindle (tool)|spindle]]. Spindles are often hollow and have an interior [[Morse taper]] on the spindle nose (i.e., facing to the right / towards the bed) by which work-holding accessories may be mounted to the spindle. Spindles may also have arrangements for work-holding on the left-hand end of the spindle with other tooling arrangements for particular tasks. (i.e., facing away from the main bed) end, or may have a hand-wheel or other accessory mechanism on their outboard end. Spindles are powered and impart motion to the workpiece.
The spindle is driven either by foot power from a treadle and flywheel or by a belt or gear drive from a power source such as electric motor or overhead line shafts. In most modern lathes this power source is an integral electric motor, often either in the headstock, to the left of the headstock, or beneath the headstock, concealed in the stand.
In addition to the spindle and its bearings, the headstock often contains parts to convert the motor speed into various [[Speeds and feeds#Spindle speed|spindle speeds]]. Various types of speed-changing mechanism achieve this, from a cone pulley or step pulley, to a cone pulley with back gear (which is essentially a low range, similar in net effect to the two-speed rear of a truck), to an entire gear train similar to that of a manual-shift automotive [[Transmission (mechanics)|transmission]]. Some motors have electronic rheostat-type speed controls, which obviates cone pulleys or gears.
The counterpoint to the headstock is the [[tailstock]], sometimes referred to as the loose head, as it can be positioned at any convenient point on the bed by sliding it to the required area. The tail-stock contains a barrel, which does not rotate, but can slide in and out parallel to the axis of the bed and directly in line with the headstock spindle. The barrel is hollow and usually contains a taper to facilitate the gripping of various types of tooling. Its most common uses are to hold a hardened steel center, which is used to support long thin shafts while turning, or to hold drill bits for drilling axial holes in the work piece. Many other uses are possible.<ref>{{cite web|url=http://www.inthewoodshop.org/methods/trlathe.shtml|title=Wait a minute...|first=Howard|last=Ruttan|url-status=dead|archive-url=https://web.archive.org/web/20090108083244/http://www.inthewoodshop.org/methods/trlathe.shtml|archive-date=2009-01-08}}</ref>
Metalworking lathes have a carriage (comprising a saddle and apron) topped with a cross-slide, which is a flat piece that sits crosswise on the bed and can be cranked at right angles to the bed. Sitting atop the cross slide is usually another slide called a compound rest, which provides two additional axes of motion, rotary and linear. Atop that sits a toolpost, which holds a [[Tool bit|cutting tool]], which removes material from the workpiece. There may or may not be a [[leadscrew]], which moves the cross-slide along the bed.
Woodturning and metal spinning lathes do not have cross-slides, but rather have [[Banjo (wood lathe)|banjos]], which are flat pieces that sit crosswise on the bed. The position of a banjo can be adjusted by hand; no gearing is involved. Ascending vertically from the banjo is a tool-post, at the top of which is a horizontal tool-rest. In woodturning, hand tools are braced against the tool-rest and levered into the workpiece. In metal spinning, the further pin ascends vertically from the tool-rest and serves as a fulcrum against which tools may be levered into the workpiece.
=== Accessories ===
{{See also|Lathe center}}
[[File:Luenette mit klappbarem oberteil.jpg|thumb|upright|left|A steady rest]]
Unless a workpiece has a taper machined onto it which perfectly matches the internal taper in the spindle, or has threads which perfectly match the external threads on the spindle (two conditions which rarely exist), an accessory must be used to mount a workpiece to the spindle.
A workpiece may be bolted or screwed to a [[lathe faceplate|faceplate]], a large, flat disk that mounts to the spindle. In the alternative, [[Dog (engineering)#Lathe dog|faceplate dogs]] may be used to secure the work to the faceplate.
A workpiece may be mounted on a [[mandrel]], or circular work clamped in a [[Chuck (engineering)#Three jaw|three- or four-jaw chuck]]. For irregular shaped workpieces it is usual to use a four jaw (independent moving jaws) chuck. These holding devices mount directly to the lathe headstock spindle.
In precision work, and in some classes of repetition work, cylindrical workpieces are usually held in a [[collet]] inserted into the spindle and secured either by a draw-bar, or by a collet closing cap on the spindle. Suitable collets may also be used to mount square or hexagonal workpieces. In precision toolmaking work such collets are usually of the draw-in variety, where, as the collet is tightened, the workpiece moves slightly back into the headstock, whereas for most repetition work the dead length variety is preferred, as this ensures that the position of the workpiece does not move as the collet is tightened.
A soft workpiece (e.g., wood) may be pinched between centers by using a [[Lathe center#Drive center|spur drive]] at the headstock, which bites into the wood and imparts torque to it.
[[File:CenterLiveDead.jpg|thumb|right|Running center (top)<br /> Dead center (bottom)]]
A soft dead center is used in the headstock spindle as the work rotates with the centre. Because the centre is soft it can be trued in place before use. The included angle is 60°. Traditionally, a hard [[lathe center#Dead center|dead center]] is used together with suitable lubricant in the tailstock to support the workpiece. In modern practice the dead center is frequently replaced by a [[Lathe center#Running center|running center]], as it turns freely with the workpiece—usually on ball bearings—reducing the frictional heat, especially important at high speeds. When clear facing a long length of material it must be supported at both ends. This can be achieved by the use of a [[lathe (metal)#Steady and follower rests|traveling or fixed steady]]. If a steady is not available, the end face being worked on may be supported by a dead (stationary) half center. A half center has a flat surface machined across a broad section of half of its diameter at the pointed end. A small section of the tip of the dead center is retained to ensure concentricity. Lubrication must be applied at this point of contact and tail stock pressure reduced.  A [[lathe carrier]] or [[lathe dog]] may also be employed when turning between two centers.<ref>{{cite web|url=http://www.lathes.co.uk/page13.html|title=Hints & Tips for Using a Lathe|work=“George Wilson’s” Hints and Tips |publisher=Lathes.co.uk|access-date=29 November 2010|archive-url=https://web.archive.org/web/20101201073248/http://www.lathes.co.uk/page13.html|archive-date=1 December 2010|url-status=live|df=dmy-all}}</ref>
In woodturning, one variation of a running center is a [[Lathe center#Cup center|cup center]], which is a cone of metal surrounded by an annular ring of metal that decreases the chances of the workpiece splitting.
A circular metal plate with even spaced holes around the periphery, mounted to the spindle, is called an "index plate". It can be used to rotate the spindle to a precise angle, then lock it in place, facilitating repeated auxiliary operations done to the workpiece.
Other accessories, including items such as taper turning attachments, knurling tools, vertical slides, fixed and traveling steadies, etc., increase the versatility of a lathe and the range of work it may perform.
=== Modes of use ===
When a workpiece is fixed between the headstock and the tail-stock, it is said to be "between centers". When a workpiece is supported at both ends, it is more stable, and more force may be applied to the workpiece, via tools, at a right angle to the axis of rotation, without fear that the workpiece may break loose.
When a workpiece is fixed only to the spindle at the headstock end, the work is said to be "face work". When a workpiece is supported in this manner, less force may be applied to the workpiece, via tools, at a right angle to the axis of rotation, lest the workpiece rip free. Thus, most work must be done axially, towards the headstock, or at right angles, but gently.
When a workpiece is mounted with a certain axis of rotation, worked, then remounted with a new axis of rotation, this is referred to as "eccentric turning" or "multi-axis turning". The result is that various cross sections of the workpiece are rotationally symmetric, but the workpiece as a whole is not rotationally symmetric. This technique is used for camshafts, various types of chair legs.
=== Sizes ===
Lathes are usually 'sized' by the capacity of the work that they may hold. Usually large work is held at both ends either using a chuck or other drive in the headstock and a centre in the tailstock. To maximise size, turning between centres allows the work to be as close to the headstock as possible and is used to determine the longest piece the lathe will turn: when the base of the tailstock is aligned with the end of the bed. The distance between centres gives the maximum length of work the lathe will officially hold. It is possible to get slightly longer items in if the tailstock overhangs the end of the bed but this is an ill-advised practice. Purchasing an extension or larger bed would be a wise alternative.
The other dimension of the workpiece is how far off-centre it can be. This is known as the 'swing' ("The distance from the head center of a lathe to the bed or ways, or to the rest. The swing determines the diametric size of the object which is capable of being turned in the lathe; anything larger would interfere with the bed. This limit is called the swing of the bed. The swing of the rest is the size which will rotate above the rest, which lies upon the bed.")<ref>{{cite book |last1=Knight |first1=Edward H. |title=The Practical Dictionary of Mechanics |date=1875 |publisher=Cassell & co / Houghton Mifflin |location=London / U.S. |page=2469 [https://Mechanicalminds.org Mechanicalminds.org] }}</ref> from the notion that the work 'swings' from the centre upon which it is mounted. This makes more sense with odd-shaped work but as the lathe is most often used with cylindrical work, it is useful to know the maximum diameter of work the lathe will hold. This is simply the value of the swing (or centre height above the bed) multiplied by two. For some reason, in the U.S. swing is assumed to be diameter but this is incorrect. To be clear on size, it is better, therefore, to describe the dimension as 'centre height above the bed'. As parts of the lathe reduce capacity, measurements such as 'swing over cross slide' or other named parts can be found.
=== Varieties ===
{{more citations needed section|date=April 2014}}
The smallest lathes are "jewelers lathes" or "watchmaker lathes", which, though often small enough to be held in one hand are normally fastened to a bench.<ref>[https://www.csparks.com/watchmaking/Lathes.html Watchmaking Lathes] page by an amateur, describing and showing jewelers and watchmaker lathes and there usage (Sparks Communication website)</ref> There are rare and even smaller [[mini lathe]]s made for precision cutting.<ref name="microlathetokyo">{{cite web | url = https://www.designnews.com/automation-motion-control/tiny-lathe-produces-micro-parts/97554728735712 | author = Dennis Normile, Tokyo | title = The smallest micro lathe, made by researchers in Tokyo, Japan | accessdate = 2007-06-07 | publisher = designnews.com | date = 2001-07-16 | archive-date = 2019-11-04 | archive-url = https://web.archive.org/web/20191104014707/https://www.designnews.com/automation-motion-control/tiny-lathe-produces-micro-parts/97554728735712 | url-status = dead }}</ref> The workpieces machined on a jeweler's lathe are often metal, but other softer materials can also be machined. Jeweler's lathes can be used with hand-held "graver" tools or with a "compound rest" that attach to the lathe bed and allows the tool to be clamped in place and moved by a screw or lever feed. Graver tools are generally supported by a T-rest, not fixed to a cross slide or compound rest. The work is usually held in a collet, but high-precision 3 and 6-jaw chucks are also commonly employed. Common spindle bore sizes are 6&nbsp;mm,  8&nbsp;mm and 10&nbsp;mm. The term WW refers to the Webster/Whitcomb collet and lathe, invented by the American Watch Tool Company of Waltham, Massachusetts. Most lathes commonly referred to as watchmakers lathes are of this design. In 1909, the American Watch Tool company introduced the Magnus type collet (a 10-mm body size collet) using a lathe of the same basic design, the Webster/Whitcomb Magnus. (F.W.Derbyshire, Inc. retains the trade names Webster/Whitcomb and Magnus and still produces these collets.<ref>[https://www.mmsonline.com/suppliers/fw-derbyshire Trade names] on the F.W. Derbyshire company website</ref>) Two bed patterns are common: the WW (Webster Whitcomb) bed, a truncated triangular prism (found only on 8 and 10&nbsp;mm watchmakers' lathes); and the continental D-style bar bed (used on both 6&nbsp;mm and 8&nbsp;mm lathes by firms such as Lorch and Star). Other bed designs have been used, such as a triangular prism on some Boley 6.5&nbsp;mm lathes, and a V-edged bed on IME's 8&nbsp;mm lathes.
Smaller metalworking lathes that are larger than jewelers' lathes and can sit on a bench or table, but offer such features as tool holders and a screw-cutting gear train are called hobby lathes, and larger versions, "bench lathes" - this term also commonly applied to a special type of high-precision lathe used by toolmakers for one-off jobs.<ref>{{cite web|last1=Griffiths|first1=Tony|title=Makers of "Bench Precision" Lathes|url=http://www.lathes.co.uk/precision-bench-lathes-list|website=LATHES.CO.UK|access-date=5 February 2018|archive-url=https://web.archive.org/web/20171227132348/http://www.lathes.co.uk/precision-bench-lathes-list/|archive-date=27 December 2017|url-status=live|df=dmy-all}}</ref> Even larger lathes offering similar features for producing or modifying individual parts are called "engine lathes". Lathes of these types do not have additional integral features for repetitive production, but rather are used for individual part production or modification as the primary role.
Lathes of this size that are designed for mass manufacture, but not offering the versatile screw-cutting capabilities of the engine or bench lathe, are referred to as "second operation" lathes.
Lathes with a very large spindle bore and a chuck on both ends of the spindle are called "oil field lathes".
Fully automatic mechanical lathes, employing cams and gear trains for controlled movement, are called [[Automatic lathe#Screw machine|screw machine]]s.
Lathes that are controlled by a computer are [[Lathe (metal)#CNC lathe / CNC turning center|CNC lathes]].
Lathes with the spindle mounted in a vertical configuration, instead of horizontal configuration, are called vertical lathes or vertical boring machines. They are used where very large diameters must be turned, and the workpiece (comparatively) is not very long.
A lathe with a tool post that can rotate around a vertical axis, so as to present different tools towards the headstock (and the workpiece) are [[Lathe (metal)#Turret lathe|turret lathes]].<ref>Parker, Dana T. ''Building Victory: Aircraft Manufacturing in the Los Angeles Area in World War II,'' p. 81, 123, Cypress, CA, 2013. {{ISBN|978-0-9897906-0-4}}.</ref>
A lathe equipped with indexing plates, profile cutters, spiral or helical guides, etc., so as to enable [[ornamental turning]] is an [[#Ornamental turning|ornamental lathe]].
Various combinations are possible: for example, a vertical lathe can have CNC capabilities as well (such as a [[CNC VTL]]).
Lathes can be combined with other machine tools, such as a [[Drill#Drill press|drill press]] or [[milling machine|vertical milling machine]]. These are usually referred to as [[Lathe (metal)#Combination lathe|combination lathes]].
== Uses ==
=== Woodworking ===
[[File:Woodlathe.JPG|thumb|right|A modern woodworking lathe]]
[[File:JaquesCookStaunton.jpg|thumb|right|[[Chess pieces]] may be manufactured by way of a lathe.]]
Woodworking lathes are the oldest variety, apart from pottery wheels. All other varieties are descended from these simple lathes. An adjustable horizontal metal rail, the tool-rest, between the material and the operator accommodates the positioning of shaping tools, which are usually hand-held. After shaping, it is common practice to press and slide sandpaper against the still-spinning object to smooth the surface made with the metal shaping tools. The tool-rest is usually removed during sanding, as it may be unsafe to have the operators hands between it and the spinning wood.{{citation needed|date=October 2019}}
Many woodworking lathes can also be used for making bowls and plates. The bowl or plate needs only to be held at the bottom by one side of the lathe. It is usually attached to a metal face plate attached to the spindle. With many lathes, this operation happens on the left side of the headstock, where are no rails and therefore more clearance. In this configuration, the piece can be shaped inside and out. A specific curved tool-rest may be used to support tools while shaping the inside. Further detail can be found on the [[woodturning]] page.
Most woodworking lathes are designed to be operated at a speed of between 200 and 1,400 revolutions per minute, with slightly over 1,000 rpm considered optimal for most such work, and with larger workpieces requiring lower speeds.<ref name="Conover2000">{{citation|author=Ernie Conover|title=Turn a Bowl with Ernie Conover: Getting Great Results the First Time Around|url=https://books.google.com/books?id=YNGOirjO8NgC&pg=PA16|year=2000|publisher=Taunton|isbn=978-1-56158-293-8|page=16}}</ref>
=== Duplicating ===
{{main|Copying lathe}}
[[File:Harpers Ferry gun smith shop - Blanchard lathe - 01.jpg|thumb|Water-powered Blanchard lathe used for duplicating gun stocks from the 1850s. [[Harpers Ferry Armory]].]]
One type of specialized lathe is duplicating or copying lathe. Some types of them are known as Blanchard lathe, after [[Thomas Blanchard (inventor)|Thomas Blanchard]]. This type of lathe was able to create shapes identical to a standard pattern and it revolutionized the process of gun [[Stock (firearm)|stock]] making in the 1820s when it was invented.<ref>{{cite book|last1=Smith|first1=Merritt Roe|title=Harpers Ferry Armory and the New Technology: The Challenge of Change|date=2015|publisher=Cornell University Press|isbn=9780801454394|url=https://books.google.com/books?id=D_RqBgAAQBAJ&pg=PP1|access-date=30 June 2016}}</ref>
The [[Hermitage Museum]], Russia displays the copying lathe for [[ornamental turning]]: making medals and guilloche patterns, designed by [[Andrey Nartov]], 1721.<ref>{{Cite web|url=https://ornamentalturning.net/early_modern_russia_turners.html|title=Ornamental Turning - Turners of the Early Modern Period in Russia|website=ornamentalturning.net}}</ref><ref>Book review of: ''Nartov and his Theatrum Machinarium'' (translated from Russian in 1966);  {{doi|10.2307/3102014}}, {{JSTOR|3102014}}
</ref>
=== Patternmaking ===
[[File:Patternmaker's double lathe (Carpentry and Joinery, 1925).jpg|thumb|Patternmaker's double lathe (Carpentry and Joinery, 1925)]]
Used to make a [[Pattern (casting)|pattern]] for [[foundries]], often from wood, but also plastics. A patternmaker's lathe looks like a heavy wood lathe, often with a turret and either a [[leadscrew]] or a rack and [[pinion]] to manually position the [[Turret lathe|turret]]. The turret is used to accurately cut straight lines. They often have a provision to turn very large parts on the other end of the headstock, using a free-standing toolrest. Another way of turning large parts is a sliding bed, which can slide away from the headstock and thus open up a gap in front of the headstock for large parts.
=== Metalworking ===
{{Main|Metal lathe}}
In a [[Lathe (metal)|metalworking lathe]], metal is removed from the workpiece using a hardened [[tool bit|cutting tool]], which is usually fixed to a solid moveable mounting, either a tool-post or a turret, which is then moved against the workpiece using handwheels or computer-controlled motors. These cutting tools come in a wide range of sizes and shapes, depending upon their application. Some common styles are diamond, round, square and triangular.
The tool-post is operated by lead-screws that can accurately position the tool in a variety of planes. The tool-post may be driven manually or automatically to produce the roughing and finishing cuts required to ''turn'' the workpiece to the desired shape and dimensions, or for cutting [[screw thread|threads]], [[worm gear]]s, etc. [[Cutting fluid]] may also be pumped to the cutting site to provide cooling, lubrication and clearing of [[swarf]] from the workpiece. Some [[Lathe (metal)#CNC lathe|lathes]] may be operated under control of a [[computer]] for [[mass production]] of parts (see "[[CNC|Computer numerical control]]").
Manually controlled metalworking lathes are commonly provided with a variable-ratio gear-train to drive the main lead-screw. This enables different [[Screw thread#Lead, pitch, and starts|thread pitches]] to be cut. On some older lathes or more affordable new lathes, the gear trains are changed by swapping gears with various numbers of teeth onto or off of the shafts, while more modern or expensive manually controlled lathes have a '''quick-change box''' to provide commonly used ratios by the operation of a lever. CNC lathes use computers and servomechanisms to regulate the rates of movement.
On manually controlled lathes, the thread pitches that can be cut are, in some ways, determined by the pitch of the lead-screw: A lathe with a [[metre|metric]] lead-screw will readily cut metric threads (including [[British Association screw threads|BA]]), while one with an imperial lead-screw will readily cut [[Imperial unit#Measures of length|imperial-unit]]-based threads such as [[British Standard Whitworth|BSW]] or [[Unified Thread Standard|UTS]] (UNF, UNC). This limitation is not insurmountable, because a 127-tooth gear, called a transposing gear, is used to translate between metric and inch thread pitches. However, this is optional equipment that many lathe owners do not own. It is also a larger change-wheel than the others, and on some lathes may be larger than the change-wheel mounting banjo is capable of mounting.
The workpiece may be supported between a pair of points called [[Lathe center|centres]], or it may be bolted to a faceplate or held in a [[Chuck (engineering)|chuck]]. A chuck has movable jaws that can grip the workpiece securely.
There are some effects on material properties when using a metalworking lathe. There are few chemical or physical effects, but there are many mechanical effects, which include residual stress, micro-cracks, work-hardening, and tempering in hardened materials.
=== Cue lathes ===
Cue lathes function similarly to turning and spinning lathes, allowing a perfectly radially-symmetrical cut for [[cue stick|billiard cues]]. They can also be used to refinish cues that have been worn over the years.
=== Glass-working ===
Glass-working lathes are similar in design to other lathes, but differ markedly in how the workpiece is modified. Glass-working lathes slowly rotate a hollow glass vessel over a fixed- or variable-temperature flame. The source of the flame may be either hand-held or mounted to a banjo/cross-slide that can be moved along the lathe bed. The flame serves to soften the glass being worked, so that the glass in a specific area of the workpiece becomes ductile and subject to forming either by inflation ("[[glassblowing]]") or by deformation with a heat-resistant tool. Such lathes usually have two head-stocks with chucks holding the work, arranged so that they both rotate together in unison. Air can be introduced through the headstock chuck spindle for glassblowing. The tools to deform the glass and tubes to blow (inflate) the glass are usually handheld.
In [[diamond turning]], a computer-controlled lathe with a diamond-tipped tool is used to make precision optical surfaces in glass or other optical materials. Unlike conventional optical grinding, complex [[aspheric lens|aspheric]] surfaces can be machined easily. Instead of the dovetailed ways used on the tool slide of a metal-turning lathe, the ways typically float on air bearings, and the position of the tool is measured by optical interferometry to achieve the necessary standard of precision for optical work. The finished work piece usually requires a small amount of subsequent polishing by conventional techniques to achieve a finished surface suitably smooth for use in a lens, but the rough grinding time is significantly reduced for complex lenses.
=== Metal-spinning ===
{{Main|metal spinning}}
In [[metal spinning]], a disk of sheet metal is held perpendicularly to the main axis of the lathe, and tools with polished tips (''spoons'') or roller tips are hand-held, but levered by hand against fixed posts, to develop pressure that deforms the spinning sheet of metal.
Metal-spinning lathes are almost as simple as wood-turning lathes. Typically, metal spinning requires a mandrel, usually made from wood, which serves as the template onto which the workpiece is formed (asymmetric shapes can be made, but it is a very advanced technique). For example, to make a [[sheet metal]] bowl, a solid block of wood in the shape of the bowl is required; similarly, to make a [[vase]], a solid template of the vase is required.
Given the advent of high-speed, high-pressure, industrial die forming, metal spinning is less common now than it once was, but still a valuable technique for producing one-off prototypes or small batches, where die forming would be uneconomical.
=== Ornamental turning ===
{{main|Ornamental turning}}
The ornamental turning lathe was developed around the same time as the industrial screw-cutting lathe in the nineteenth century. It was used not for making practical objects, but for [[decorative]] work: ''ornamental turning''. By using accessories such as the horizontal and vertical [[cutting frame]]s, eccentric [[chuck (engineering)|chuck]] and elliptical chuck, solids of extraordinary complexity may be produced by various generative procedures.
A special-purpose lathe, the [[Rose engine lathe]], is also used for ornamental turning, in particular for engine turning, typically in precious metals, for example to decorate pocket-watch cases. As well as a wide range of accessories, these lathes usually have complex dividing arrangements to allow the exact rotation of the mandrel. Cutting is usually carried out by rotating cutters, rather than directly by the rotation of the work itself. Because of the difficulty of polishing such work, the materials turned, such as wood or ivory, are usually quite soft, and the cutter has to be exceptionally sharp. The finest ornamental lathes are generally considered to be those made by [[Holtzapffel]] around the turn of the 19th century.
=== Reducing ===
Many types of lathes can be equipped with accessory components to allow them to reproduce an item: the original item is mounted on one spindle, the blank is mounted on another, and as both turn in synchronized manner, one end of an arm "reads" the original and the other end of the arm "carves" the duplicate.
A '''reduction lathe''' is a specialized lathe that is designed with this feature and incorporates a mechanism similar to a [[pantograph]], so that when the "reading" end of the arm reads a detail that measures one inch (for example), the cutting end of the arm creates an analogous detail that is (for example) one quarter of an inch (a 4:1 reduction, although given appropriate machinery and appropriate settings, any reduction ratio is possible).
Reducing lathes are used in coin-making, where a plaster original (or an epoxy master made from the plaster original, or a copper-shelled master made from the plaster original, etc.) is duplicated and reduced on the reducing lathe, generating a [[Coining (mint)#Modern die production|master die]].
=== Rotary lathes ===
A lathe in which wood logs are turned against a very sharp blade and peeled off in one continuous or semi-continuous roll. Invented by [[Immanuel Nobel]] (father of the more famous [[Alfred Nobel]]). The first such lathes in the United States  were set up in the mid-19th century. The product is called [[wood veneer]] and it is used for making [[plywood]] and as a cosmetic surface veneer on some grades of [[particle board|chipboard]].
=== Watchmaking ===
Watchmakers lathes are delicate but precise metalworking lathes, usually without provision for [[screw]]cutting, and are still used by [[horologist]]s for work such as the turning of balance staffs. A handheld tool called a [[hand engraving|graver]], supported by a tool-rest, is often used in preference to a slide-mounted tool. The original watchmaker's turns was a simple [[dead-center lathe]] with a moveable rest and two loose head-stocks. The workpiece would be rotated by a bow, typically of [[horsehair]], wrapped around it.
=== Transcription or recording ===
{{main|Disc cutting lathe}}
Transcription or recording [[Disc cutting lathe|lathes]] are used to make grooves on a surface for recording sounds. These were used in creating sound grooves on wax cylinders and then on flat recording discs originally also made of wax, but later as [[Acetate disc|lacquers]] on a substratum. Originally the cutting lathes were driven by sound vibrations through a horn in a process known as [[Phonograph record#Acoustic recording|acoustic recording]] and later driven by an electric current when [[microphone]]s were first used in sound recording. Many such lathes were professional models, but others were developed for home recording and were common before the advent of home tape recording.
== Performance ==
National and international standards are used to standardize the definitions, environmental requirements, and test methods used for the performance evaluation of lathes. Election of the standard to be used is an agreement between the supplier and the user and has some significance in the design of the lathe. In the United States, ASME has developed the B5.57 Standard entitled "Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers", which establishes requirements and methods for specifying and testing the performance of CNC lathes and turning centers.<ref>{{cite web|title=Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers|url=https://www.asme.org/products/codes-standards/b557-2012-methods-performance-evaluation-computer|website=asme.org|publisher=The American Society of Mechanical Engineers|access-date=5 February 2018|archive-url=https://web.archive.org/web/20171107023935/https://www.asme.org/products/codes-standards/b557-2012-methods-performance-evaluation-computer|archive-date=7 November 2017|url-status=live|df=dmy-all}}</ref>
== See also ==
* [[Diamond turning]]
* [[Gun drill]]
* [[Mandrel]]
* [[Segmented turning]]
* [[Solid of revolution]]
* [[Unimat]]
== References ==
{{Reflist}}
== Further reading ==
* {{Cite book | first=Charles | last=Holtzapffel | year=1843–1897 | title=Turning and Mechanical Manipulation Volume V}}
* {{Cite book | first=Frank | last=Marlow | year=2008 | title=Machine Shop Essentials: Q & A | publisher=Metal Arts Press | isbn=978-0-9759963-3-1 }}
* [[Oscar E. Perrigo]]. ''[https://archive.org/details/lathedesignconst00perrrich Modern American Lathe Practice. A New, Complete and Practical Work on the "king of Machine Shop Tools."],'' 1907.
* {{Cite book | first=Richard | last=Raffan | year=2001 | title=Turning Wood With Richard Raffan | publisher=Taunton | isbn=1-56158-417-7 }}
* [[Joshua Rose (engineer)|Joshua Rose]]. ''[https://archive.org/details/completepractic01rosegoog The Complete Practical Machinist: Embracing Lathe Work, Vise Work, Drills, etc.],''  Philadelphia: H.C. Baird & Co., 1876; [https://archive.org/details/completepractic00rosegoog 2nd ed. 1885].
* {{Cite book | first=Lawrence | last=Sparey | year=1947 | title=The Amateur's Lathe | publisher=Special Interest Model Books | isbn=0-85242-288-1 }}
* {{Cite book | first = Robert S | last = Woodbury | title = History of the Lathe to 1850 | year = 1961 | publisher = Society for the History of Technology | location = Cleveland, Ohio | isbn = 978-0-262-73004-4 | url-access = registration | url = https://archive.org/details/historyoflatheto00robe }}
* {{Cite book |title=The compact lathe |last=Bray |first=Stan |date=2004 |publisher=Special Interest Model Books |isbn=1854862278 |edition=2nd rev. |location=Poole |oclc=63184337}}
== External links ==
{{commons category|Lathes}}
* [https://www.theengineerspost.com/lathe-machine-operations/ Lathe Machine Operations]
* [http://lathes.co.uk/page21.html Machine Tool Archive]
* [http://www.regia.org/woodwork.htm Early Wood-Working]
* [http://www.historicgames.com/lathes/springpole.html Spring pole lathe]
* [http://digital.lib.msu.edu/collections/index.cfm?TitleID=274 Modern Machine Shop Practice] a historic Victorian text describing lathe design, construction and use in the 1880s.
* [https://books.google.com/books?id=wyoDAAAAMBAJ&dq=popular+science+1930&pg=PA149 "The Forgotten Power Tool."] ''Popular Science'', December 1959, pp.&nbsp;149–152.
* [http://www.aes.org/aeshc/docs/recording.technology.history/lathe.html Disc Cutting and Recording Lathes]
* [https://stuartking.co.uk/history-of-the-lathe-part-one-reciprocal-motion/ History of the Lathe]
{{Metalworking navbox|machopen}}
{{Machine and metalworking tools}}
{{Authority control}}
[[Category:Lathes| ]]
[[Category:Egyptian inventions]]