Closed-loop transfer function

In control theory, a closed-loop transfer function is a mathematical function describing the net result of the effects of a feedback control loop on the input signal to the plant under control.

Overview

The closed-loop transfer function is measured at the output. The output signal can be calculated from the closed-loop transfer function and the input signal. Signals may be waveforms, images, or other types of data streams. An example of a closed-loop block diagram, from which a transfer function may be computed, is shown below: File:Closed Loop Block Deriv.png The summing node and the G(s) and H(s) blocks can all be combined into one block, which would have the following transfer function:

$\frac{Y(s)}{X(s)}=\frac{G(s)}{1+G(s)H(s)}$

$G(s)$ is called the feed forward transfer function, $H(s)$ is called the feedback transfer function, and their product $G(s)H(s)$ is called the open-loop transfer function.

Derivation

We define an intermediate signal Z (also known as error signal) shown as follows: Using this figure we write:

$Y(s)=G(s)Z(s)$

$Z(s)=X(s)-H(s)Y(s)$

Now, plug the second equation into the first to eliminate Z(s):

$Y(s)=G(s)[X(s)-H(s)Y(s)]$

Move all the terms with Y(s) to the left hand side, and keep the term with X(s) on the right hand side:

$Y(s)+G(s)H(s)Y(s)=G(s)X(s)$

Therefore,

$Y(s)(1+G(s)H(s))=G(s)X(s)$

$\Rightarrow \frac{Y(s)}{X(s)}=\frac{G(s)}{1+G(s)H(s)}$

See also

• Federal Standard 1037C
• Open-loop controller
• Control theory § Open-loop and closed-loop (feedback) control

References

• Public Domain This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22.